

#Charging icom ic r6 manual
Instruction manual ir6 communications receiver this device complies with part 15 of the fcc rules. Will reduce the battery’s performance and battery life.

Using the batteries out of their specified temperature range It’s a good idea to clean battery terminals once a week.Īlways use the batteries within the speci-įied temperature range, –5˚C to +60˚C (+23˚F to +140˚F).

Remove the battery cover from the receiver.
#Charging icom ic r6 software
Memory contents such as frequencies, channel name, category, group name, set mode items, etc, can be programmed easily with the optional cloning software CS-R6.Before installing, or replacing the batteries, hold down The pocket beep function alerts you with a beep sound when a matched tone signal is received. Tone scan detects a tone frequency used in a channel. This is convenient for monitoring a specified repeater or station etc. Built in a drip resistant case, the radio is protected from harsh weather and damp conditions.Ī built-in ferrite rod antenna improves reception for AM broadcast stations without the need of a whip antenna.ĬTCSS and DTCS tones provide quiet stand-by while waiting for a matched tone signal. The standard Ni-MH batteries can be charged simultaneously during operation, making this a useful function while using the IC-R6 in your vehicle or at home.ĭesigned for ease of use, the IC-R6 is ultra compact measuring only 58(W)x 86(H)x 29.8(D)mm and weighing just 200g enabling it to fit neatly in the palm of your hand. The IC-R6 has an external DC power jack for operation with the AC adapter, BC-07 or optional cigarette lighter cable, CP-18A/E. The VSC opens the squelch only when a modulated signal is detected and ignores unmodulated, beat noise signals. The optional BC-194 charger stand charges the Ni-MH rechargeable cells eliminating the need to connect and disconnect an AC adapter to the DC power jack of the receiver. The 36mm large speaker delivers 150mW* of loud audio for noisy environments. The IC-R6 uses a BTL (bridge-tied load) amplifier that doubles the audio output. Each regular channel, scan edge and memory bank can be assigned a 6-character name. 100 channels per bank) for flexible grouping. The regular 1300 channels can be divided into 22 memory banks (Max. The 1300 memory channels, 50 band scan edges and 200 auto memory write channels provide more than enough capacity to locate and store interesting signals. * 50mW output with external speaker (8Ù).ġ300 Memory Channels, 22 Memory Banks With A 6-Character Comment With the supplied rechargeable Ni-MH cells, the IC-R6 provides up to 15 hours of continuous receive*. The IC-R6 has an efficient low current consumption design for long operation. 15 hours* of continuous receive capability.The IC-R6 has a 100 channels per second high speed scan capability in VFO mode, useful when searching over 1300MHz of spectrum!
#Charging icom ic r6 tv
With a wide frequency range of 0.100-1309.995MHz in AM, FM, and WFM modes Amateur stations, AM, FM, short wave broadcasts, TV audio* and a variety of utility communications can be listened to. All these new features combined with a high degree of usability means that the IC-R6 will be equally at home with any casual listener of broadcast stations or the serious scanning enthusiast seeking a pocket sized quality receiver. Freq 0.100 - 1309,995 (Svi kanali su otvoreni)Ĭompact Wideband Handheld ReceiverWhile retaining basic features of its popular predecessor the IC-R5, the IC-R6 contains many improvements including 100 channel per second scanning speed, 1300 memory channels, 15 hours of continuous receive capability, optional drop-in charger stand and voice control squelch.
